During the Late Bronze Age, the Mycenaeans used a large variety of swords. Initially, the Mycenaeans had a fondness for long, thin, and relatively fragile rapier-like swords, but over time they started to use ever shorter and stouter blades, which began to resemble dirks more than anything else and were probably all used for thrusting (see also the picture above; source).
A problem with bronze is that it bends relatively easily and tends to dull more quickly, which is why shorter, stabbing swords tend to be more practical during the Bronze Age. A lot of the longer blades of the Mycenaean era tend to show signs of frequent repairs, especially around the area of the hilt, where they had a tendency to break or split.
The Naue II-type sword
Late in the thirteenth century BC, a new type of sword is introduced in the Aegean from Central Europe, the so-called Naue II-type sword or Griffzungenschwert (“grip-tongue sword”), which tends to be around 50–70cm in length. This was, in the words of Anthony Snodgrass, the first true “cut-and-thrust” sword. The Greek examples always have a half-moon-shaped pommel at the end of the hilt.
After the destruction of the Mycenaean palaces, these swords become the predominant type of sword in use in the Aegean and with the start of the Iron Age, ca. 1000 BC at the latest, are quickly made in iron rather than bronze. Naue II-type swords are found in graves of the Early Iron Age and were also dedicated at sanctuaries.
Near this paragraph is an example of a Naue II-type sword on an Attic black-figure tondo, dated ca. 560 BC. It depicts a kneeling warrior and his sword is painted very clearly, though the shape is a little more stout than one would expect for a typical Naue II-type sword.
The Naue II sword stayed in use until the late sixth century BC and is often easily recognizable in Greek art. After about ca. 525 BC it becomes exceedingly rare in art and seems not have been used anymore by the vast majority of Greek warriors. Instead, two different types of swords enter into use from the later sixth century BC onwards.
Later Greek swords
The most common Greek sword has a leaf-shaped blade and straight cross guards. The latter is an important way to tell it apart from the Naue II-type sword, which has the hilt flow naturally into the blade and therefore lacks a cross guard. The pommel tends to be simple and is often round, squarish, or squat. These swords were often relatively short, probably around 60cm or so in length. It’s common for reenactors to refer to a sword of this type as xiphos, but that’s really the normal Greek word for sword.
Note the Attic red-figure amphora, dated ca. 500–490 BC, near this paragraph, that depicts the departure of a warrior. His sword is in in its scabbard, suspended from the shoulders using a baldric. You can clearly see the straight cross guard that easily distinguishes this type of sword from the Naue II-type.
Finally, there is the famous curved sword, often referred to as either kopis or machaira. It is sometimes referred to as a sabre and was, indeed, also used by Greek cavalrymen. In art, it is often depicted overhead to emphasize, according to some scholars, the fact that it was used for cutting down enemies. However, in Greek art, most swords tend to be shown held overhead when in used in actual combat, including the ‘cut-and-thrust’ Naue II-type sword.
A famous depiction of the kopis in action is provided by this Attic red-figure kylic dated to ca. 480 BC. It depicts a Greek (Athenian?) hoplite about to strike down a Persian soldier. Both figures are equipped with curved, slashing swords:
These last two types of swords would last into the Hellenistic period, with the kopis in particular proving popular in art, and the weapon of choice for cavalrymen.
This is part of the series: Hoplites and phalanxes.